Everything you need to know about finding a leadlight supplier
Leadlights, also commonly known as stained glass, is produced when pieces of glass are fitted into lead cames to form artistic and interesting decorative windows. Usually, an array of different coloured glass fragments are used to obtained the desired end result.
The use of leadlights in a residential home is not everybody’s cup of tea. The primary reason for this attitude may be because leadlights is typically associated with churches and cathedrals.
Leadlight Design, Size and Style
With a touch of inspiration, Leadlights can be used to transform an ordinary home into something extraordinary.
Leadlights are constructed by a special artist who incorporates different techniques to create a design to suit any personality type. Styles can range from traditional designs which incorporate heavenly, human or floral forms to modern abstract and geometric designs.
Leadlights is strong and secure enough to be fitted in exterior doors.
There are no boundaries where leadlights can be fitted. Use them in skylights, in doors, windows, in lampshades and so much more.
Panel sizes vary according to the design with full-length door sizes measuring around 1.8 square metres. When panels of more than 0.6 square metres needs to be constructed, additional strengthening will be required. This has to be done in order to prevent the panel from flexing and distorting. Reinforcing is usually also done as a norm when panels are fitted into movable structures such as doors.
Benefits of Fitting Leadlights
Besides the artistic features of leadlights, they bring a certain charm to any home. These can typically be described as follows:
Adds a sense of luxury
Light passing through the glass creates a warm/cool ambiance
Leadlights also brings about energy savings as natural light brightens a room for longer.
The cost of a leadlight is dependent on a number of factors. These include:
The panel size
Choice in glass
Number of glass pieces
When interested in fitting leadlights into your home, the first step is to seek out a supplier who will be able to provide a design or put you in contact with the artist. The time it takes to purchase and install the leadlight will largely depend on whether a leadlight was purchased directly of the floor (standard fitting), or whether a design still needs to be commissioned. Other variables include the size and complexity of the design including any possible installation challenges.
Installation of leadlights is normally done on sight as the design usually is featured in an existing fixed structure in the home.
Even though glazed glass is much stronger than normal glass, clients will have the option of double or triple glazing their leadlights, with the first adding to strength and the latter improving energy efficiency.
Leadlights may even be fitted by individuals with reasonable D.I.Y skills. The Internet is a great source of assistance and will advise on how installations should be done. Alternatively, the supplier should be able to provide a step-by-step installation guide.
A few weeks after the initial installation, special care should be taken as the putty used to fill up the gaps between the lead and the glass needs to harden.
Initially, polish is applied to add gloss and colour (usually black) on the lead and after application will require a few months to cure. It is very important that cleaning detergents or chemicals not be used as it could destroy the polish. Clean your leadlight with a soft bristle brush and soft cloth.
Should a piece of the glass in a leadlight be broken, repairs will have to be carried out. For optimal results panels will need to be removed from its frame and either semi or fully dismantled to replace the broken glass. It is always recommended that repairs be carried out by a professional.
Repair time also depends on a few factors. These include:
Location of the broken glass
Number of pieces requiring replacement
Age of the panel
Condition of the lead
Choosing a Leadlight Supplier
Because of the specialised service, finding a leadlight supplier may be a difficult task. The Internet is a great resource to use when looking for a leadlight supplier. A reputable supplier will adhere to all leadlight and glazing safety codes of Australia. They will also have vast selections of designs available if customers are not sure of a particular style. Make sure to determine the guarantees and warranties for workmanship and materials prior to installation.
Find Leadlight Suppliers the Easy Way
Help1. Tell us what you need
I can help!2. Leadlight suppliers contact you
I choose you3. You choose the best leadlight supplier
Why do you need my email address?
We need your email address so that we can send you the details of businesses who express interest in your job.
Why do you need my phone number?
We need your phone number so that businesses who express interest in your job may call you for more details.