Are you looking to install audio to complete your home theatre set up but are put off by the messy cabling that typically accompanies such an installation? Audio is an increasingly important part of the home cinema experience as it is tweaked to match the high definition images reaching our screens. Whether you are watching free to air digital broadcasts or the latest Blu-ray disc, getting the audio transmitted as the broadcaster or filmmaker intended goes a long way to enhancing your home theatre set up. With this in mind hipages decided to check out a new product – a TV wall bracket with integrated audio - from Sound and Image that promises to eliminate the maze of cables in your home.

Tell us a little bit about your audio mount bracket.

“Our TV audio mount is basically an all-in-one solution comprising of a TV wall bracket with integrated amplifier and audio.”

What are the primary benefits of this product?

“The most obvious benefit is that you do not have to run cabling from your TV to your home theatre speakers as the system creates a 5.1 channel surround from the 2.1 system. It can be installed anywhere in the home – including a bedroom – where you require a cable-free envrionment.”

What does the bracket consist of?

“It is a 100w 2.1 stereo system with an amplifier built into the bracket behind the TV. Each stereo speaker, which sits on either side of the TV screen, has two 2.5 inch mid-range speakers and a 19mm tweeter. In addition there is also an ultra-slim, flat subwoofer concealed in the rear. The unit also comes with a full remote control which allows you to adjust volume, treble as well as a function for the hearing impaired.”

What is the bracket manufactured from?

“Powder coated steel stainless steel – so it is extremely robust.”

Is it adjustable?

“Yes, the screen can tilt and the two side mounted speakers can also be individually adjusted to suit your screen size.”

How does the sound quality rate?

“The unit uses SRS TruSurround HD™ audio to transform high-quality stereo sound into 5.1-channel surround sound for a truly immersive audio experience. The unit is similar in sound quality to a sound bar, but everything is hidden behind the  panel so you don’t see the subwoofer or amplifier.”

What does installation involve?

“It is a plug and play solution so once the mount is attached to your wall via the bracket, its as simple as hanging the TV on the bracket, plugging in one cable and you are good to go.”

What size TV can the mount accept?

“The 2.1 TV mount is adjustable to fit a range from 32 inch to 54 inch screens, and is wall mounted.”

Where can I listen or purchase this product?

"It is available via selected Harvey Norman stores as well as through specialist audio retailers."